SKU: | |
---|---|
Availability: | |
Quantity: | |
Product Description
Features:
Good fluidity, simple operation, non-stick mold, easy demolding, no damage to mold type;
A special anti-burning agent is added to the liquid silicone rubber to make the liquid silicone rubber mold more resistant to burning;
The number of times mold overturning is large, the replication effect is good, and the service life of the liquid silicone rubber mold is long, which is more cost-effective than ordinary silicone;
Excellent performance, it can be adjusted according to customer requirements;
Prodcut Application
Brick mold liquid silicone rubber is suitable for the production and product reproduction of various brick mold.
It can also be used for the reproduction and mold production of cultural stone, cement products, sandstone relief, cultural bricks, GRC components, gypsum lines and other industrial products.
Model | Viscosity(cps) | Hardness(Shore A) | Density (g/cm³) | Resilience (%) | Tensile strength (MPa) | Elogation at break (%) | Tear strength (KN/m) | Tensile set(%) | Line shrinkage (%) |
Test Standard | DIN53019 | GB/T531.1 | GB/T533-2008 | GB/T1681- 2009 | GB/T528 | GB/T528 | GB/T529 | GB/T528 | CGB-T14235.4 |
YR250-30MJ AB | 50 | 40 | 1.09 | 70 | 7 | 400 | 30 | 0.8 | 2.1 |
YR250-43MJ AB | 50 | 40 | 1.09 | 70 | 7 | 400 | 30 | 0.8 | 2.1 |
YR250-45MJ AB | 45 | 45 | 1.08 | 65 | 7 | 400 | 30 | 0.9 | 2.2 |
YR250-50MJ AB | 45 | 45 | 1.09 | 65 | 6.5 | 400 | 30 | 0.9 | 2.1 |
Remark | Vulcanization conditions:A/B is evenly mixed,Mold:140mm×120mm×2mm,175℃×5min compression molding.Assistance with specifications are available by contacting our engineers. |
Certification
FDA,MSDSM,RoHS, REACH and so on.
Color:
Transparency and milk white(standard colors)
Other wide variety of colors (customized)
Packing:
20KG,25KG,200KG/ drums or Customized.
How to use
1. Mix the liquid silicone and the curing agent in a ratio of 100:2;
2. After the liquid silicone rubber and the curing agent are evenly stirred, vacuumize and remove air bubbles. The vacuuming time should not be too long. Under normal circumstances, it should not exceed ten minutes;
3. Grind and polish the mold to be smooth, and then apply the release agent. The mold release agent must be evenly brushed, and fix the mold on the wooden board with glue;
4. Pour the evacuated silica gel directly onto the product. After the liquid silicone is dried and formed, take out the product and the mold is formed.
Storage and Caution
1.Shelf life: 12 Months.
2.Store in a cool dry place out of direct sunlight.
3.Do not contact with any organic compounds such as N, P, s, Sn, Pb, RG, Bi, as plasma compounds when operating the addition Liquid silicone rubber, otherwise it will cause the curing agent poisoning, cause the curing agent poisoning, and cause the phenomenon that the silicone will not cure.