SKU: | |
---|---|
Availability: | |
Quantity: | |
Product Description
0.1% Shrinkage;
Long service life;
Good liquidity, simple operation, and good replication effect;
Non-toxic, tasteless, safe, and environmentally friendly;
Strong tear resistance, high and low-temperature resistance, acid and alkali resistance, and aging resistance;
Non-stick mold, easy to demould, easy to defoaming, and no whitish;
customized color,hardness,viscosity,and operation time;
Application
Craft gift, toy gift .
Building decoration.
Character reproduction, simulation animal and plant sculpture, food mold
Candle handicraft, resin handicraft, Buddha carving handicraft, gypsum cement handicraft
Model | Viscosity(cps) | Hardness(Shore A) | Density (g/cm³) | Resilience (%) | Tensile strength (MPa) | Elogation at break (%) | Tear strength (KN/m) | Tensile set(%) | Line shrinkage (%) |
Test Standard | DIN53019 | GB/T531.1 | GB/T533-2008 | GB/T1681- 2009 | GB/T528 | GB/T528 | GB/T529 | GB/T528 | CGB-T14235.4 |
YR250-30MJ AB | 50 | 40 | 1.09 | 70 | 7 | 400 | 30 | 0.8 | 2.1 |
YR250-43MJ AB | 50 | 40 | 1.09 | 70 | 7 | 400 | 30 | 0.8 | 2.1 |
YR250-45MJ AB | 45 | 45 | 1.08 | 65 | 7 | 400 | 30 | 0.9 | 2.2 |
YR250-40MJ AB | 45 | 40 | 1.09 | 68 | 7 | 420 | 30 | 0.9 | 2.1 |
YR250-35MJ AB | 35 | 35 | 1.07 | 65 | 7 | 380 | 30 | 0.8 | 2.0 |
YR250-40MJ AB | 40 | 40 | 1.08 | 60 | 6.85 | 400 | 30 | 0.9 | 2.1 |
Remark | Vulcanization conditions: A/B is evenly mixed, Mold:140mm×120mm×2mm,175℃×5min compression molding. Assistance with specifications is available by contacting our engineers. |
Related certificate
FDA,MSDS,RoHS, REACH, etc.
Colors
Translucent, Milk white, Clear, and so on.
Can be customized color.
Packing
25KG/barrel,20KG/barrel,200KG/barrel
Operations
Mix the liquid silicone rubber and the curing agent in a proportion evenly;
Put the evenly mixed liquid silicone rubber into the vacuum machine for vacuuming and de-bubble treatment which makes the product smooth and free of bubbles;
Spray (coat) a layer of mold release agent on the already made mold seed and mold frame, fix the mold seed in the middle and pour the liquid silica gel after the bubbles have been discharged into the mold frame slowly and steadily. Finally, wait for it fully cured;
Notes
Addition type liquid silicone rubber and condensation type liquid silicone rubber cannot touch each other.
The prepared liquid silicone should be used up as soon as possible within the operational time;
Addition type liquid silicone rubber should not be in contact with water, impurities, organic tin catalysts, acids, alkalis, and compounds containing nitrogen, phosphorus, and sulfur during operation to avoid a non-curing phenomenon;