SKU: | |
---|---|
Availability: | |
Quantity: | |
Product Description
The silicone mold made of liquid silicone material will not deform or expand;
It has the advantages of high-temperature resistance, acid and alkali resistance, corrosion resistance, etc.;
It has the advantages of good weather resistance, many times of mold turning, and long service life;
Low shrinkage (≤0.3%), it can be quickly cured at room temperature, and the performance can be changed according to customer requirements;
It is suitable for the reproduction of various large, medium, and small products with complex shapes and the production of silicone molds;
Usage
Relief murals
Sandstone artworks
Garden decorations
Outdoor sculptures
Artificial sandstone materials
Garden sculptures
Shaped cultural stones
Model | Viscosity(cps) | Hardness(Shore A) | Density (g/cm³) | Resilience (%) | Tensile strength (MPa) | Elogation at break (%) | Tear strength (KN/m) | Tensile set(%) | Line shrinkage (%) |
Test Standard | DIN53019 | GB/T531.1 | GB/T533-2008 | GB/T1681- 2009 | GB/T528 | GB/T528 | GB/T529 | GB/T528 | CGB-T14235.4 |
YR250-30MJ AB | 50 | 40 | 1.09 | 70 | 7 | 400 | 30 | 0.8 | 2.1 |
YR250-43MJ AB | 50 | 40 | 1.09 | 70 | 7 | 400 | 30 | 0.8 | 2.1 |
YR250-45MJ AB | 45 | 45 | 1.08 | 65 | 7 | 400 | 30 | 0.9 | 2.2 |
YR250-40MJ AB | 45 | 40 | 1.09 | 68 | 7 | 420 | 30 | 0.9 | 2.1 |
YR250-40MJ AB | 40 | 40 | 1.08 | 60 | 6.85 | 400 | 30 | 0.9 | 2.1 |
Remark | Vulcanization conditions: A/B is evenly mixed, Mold:140mm×120mm×2mm,175℃×5min compression molding. Assistance with specifications is available by contacting our engineers. |
Certificate
FDA,MSDS,RoHS, REACH, etc.
Colors
Milk white, Clear (standard colors)
Other colors (customized)
Specification
25KG,20KG,200KG/ pail or Customized.
How to use
According to the structure, pattern, and use of the product, select the appropriate liquid silicone rubber for the ratio (100:2);
Stir the liquid silicone rubber evenly with a mixer, and then put it in a vacuum machine to vacuum(-0.1mpa) it;
After vacuuming, pour all the liquid silicone rubber into the mold seed, brush evenly, and blow off the bubbles on the liquid silicone rubber with the air gun again;
Wait for about 15 minutes after the silicone rubber is dry, and then apply the second brushing;
When the LSR is not flowing, lay a layer of gauze on the silicone mold;
After painting, put the tenon and close the mold
Pour the adjusted plaster into the wooden board, apply it neatly, and remove the outer mold after the outer mold is cured;
Store and Caution
The amount of curing agent added should depend on the temperature, and it will be reduced when the temperature is high.
The vacuuming time should be not more than ten minutes.
It can be stored unopened for 12 months at a room temperature of 25°C.