SKU: | |
---|---|
Availability: | |
Quantity: | |
Product Description
Good fluidity, low viscosity, and good operability;
High and low-temperature resistance, acid and alkali resistance, aging resistance;
With good tensile force and good tear strength, the silicone mold made will not deform;
Low linear shrinkage, easy demoulding, and many times of mold turning;
Color, hardness, viscosity, and operating time can be adjusted as requested.
Application
Handicraft mold liquid silicone rubber is mainly used for toys, craft gifts, products with fine patterns, molds, pouring mold products, POLI handicrafts, resin handicrafts, lighting, candles, and other handicrafts.
Model | Viscosity(cps) | Hardness(Shore A) | Density (g/cm³) | Resilience (%) | Tensile strength (MPa) | Elogation at break (%) | Tear strength (KN/m) | Tensile set(%) | Line shrinkage (%) |
Test Standard | DIN53019 | GB/T531.1 | GB/T533-2008 | GB/T1681- 2009 | GB/T528 | GB/T528 | GB/T529 | GB/T528 | CGB-T14235.4 |
YR250-30MJ AB | 50 | 40 | 1.09 | 70 | 7 | 400 | 30 | 0.8 | 2.1 |
YR250-43MJ AB | 50 | 40 | 1.09 | 70 | 7 | 400 | 30 | 0.8 | 2.1 |
YR250-45MJ AB | 45 | 45 | 1.08 | 65 | 7 | 400 | 30 | 0.9 | 2.2 |
YR250-50MJ AB | 45 | 45 | 1.09 | 65 | 6.5 | 400 | 30 | 0.9 | 2.1 |
Remark | Vulcanization conditions:A/B is evenly mixed,Mold:140mm×120mm×2mm,175℃×5min compression molding.Assistance with specifications are available by contacting our engineers. |
Certificate
FDA,MSDS,RoHS, REACH and so on.
Color
Transparency and milk white(standard colors)
Other wide variety of colors (customized)
Packing
20KG,25KG,200KG/ drums or Customized.
How to use
Mix liquid silicone rubber and the curing agent according to the weight ratio and mix them evenly (the ratio of addition type is 1:1);
Put the liquid silicone rubber after mixing and stirring into a vacuum machine for vacuuming and de-bubbling treatment;
Spray a layer of release agent on the mold frame, fix the mold seed in the middle, pour the liquid silicon rubber after the bubbles have been discharged into the mold frame slowly and steadily, and then stand still and wait for it to completely solidify;
After the mold liquid silicone rubber is completely cured, it can be demolded, and the liquid silicone rubber mold is taken out for edge treatment;
Generally it is recommended to put the liquid silicone rubber mold into use after being placed for 24 hours, which can bring out the best use effect of the mold;
Storage and Caution
1.Storage life: 12 Months.
2.Store in a cool dry place out of direct sunlight.
3.Do not contact with any organic compounds such as N, P, s, Sn, Pb, RG, Bi, as plasma compounds when operating the addition Liquid silicone rubber, otherwise it will cause the curing agent poisoning, cause the curing agent poisoning, and cause the phenomenon that the silicone will not cure.