SKU: | |
---|---|
Availability: | |
Quantity: | |
Product Description
No oil;
Low shrinkage≤1‰ ;
Long service life;
Strong tear resistance,excllent pulling force, more durable, and no deformation;
Excellent burning resistance and high-temperature resistance can reach 180℃-250℃.
The hardness, viscosity, and operation time of mold silica gel can be adjusted as needed to meet different customer requirements.
Application
Resin model craft pendant, handicraft sculpture, animal clay mold.
Fine glass fiber reinforced plastic sculpture, character sculpture.
Animation game character model customization, traditional plaster statue, Guanyin plaster statue mold.
Clay sculpture model, animal clay sculpture mold, glass fiber reinforced plastic sculpture.
Model | Viscosity(cps) | Hardness(Shore A) | Density (g/cm³) | Resilience (%) | Tensile strength (MPa) | Elogation at break (%) | Tear strength (KN/m) | Tensile set(%) | Line shrinkage (%) |
Test Standard | DIN53019 | GB/T531.1 | GB/T533-2008 | GB/T1681- 2009 | GB/T528 | GB/T528 | GB/T529 | GB/T528 | CGB-T14235.4 |
YR250-30MJ AB | 50 | 40 | 1.09 | 70 | 7 | 400 | 30 | 0.8 | 2.1 |
YR250-43MJ AB | 50 | 40 | 1.09 | 70 | 7 | 400 | 30 | 0.8 | 2.1 |
YR250-45MJ AB | 45 | 45 | 1.08 | 65 | 7 | 400 | 30 | 0.9 | 2.2 |
YR250-40MJ AB | 45 | 40 | 1.09 | 68 | 7 | 420 | 30 | 0.9 | 2.1 |
YR250-35MJ AB | 35 | 35 | 1.07 | 65 | 7 | 380 | 30 | 0.8 | 2.0 |
YR250-40MJ AB | 40 | 40 | 1.08 | 60 | 6.85 | 400 | 30 | 0.9 | 2.1 |
Remark | Vulcanization conditions: A/B is evenly mixed, Mold:140mm×120mm×2mm,175℃×5min compression molding. Assistance with specifications is available by contacting our engineers. |
Related certificate
FDA,MSDS,RoHS, REACH, etc.
Colors
Translucent, Milk white, Clear, and so on.
Can be customized color.
Packing
25kg/barrel,20kg/barrel,200kg/barrel
Operations
Mix the liquid silicone rubber and the curing agent in a ratio of 100:2, then stir evenly;
Put the proportioned liquid silicone into the vacuum machine for vacuuming and de-bubbling treatment.;
Spray a layer of Vaseline on the mold seed and mold frame, fix the mold seed in the middle, and then slowly and steadily pour the liquid silicone rubber after the bubbles have been discharged into the mold frame;
Demould after complete curing, use it after 24 hours;
Attention
Addition type liquid silicone rubber and condensation type fluid silicone rubber need to not be in contact with each other, or else the liquid silicone rubber will not be curing.