SKU: | |
---|---|
Availability: | |
Quantity: | |
Product Description
White Kitchen And Bathroom Caulking One Component Anti Fungal Silicone Sealant
YR- K112 White Kitchen And Bathroom Caulking One part Anti Fungal Silicone Sealant is one part, neutral, room temperature curing silicone sealant, easy to use and gormandize curing.
Compostion
RTV Silicone Sealant
One- part, Neutral curing
FEATURES
Longer service life.
High strength, good pliantness, moderate hardness, a variety of substrates have good cling performance.
Excellent riding resistance, anti- fungal resistant and high and low temperature performance, it can be repel long- term ultraviolet irradiation, extreme temperature(- 50 ℃ to 100 ℃) and doesn't affect the performance.
Application
Sealing of aseptic installations, penstocks, bathtubs, shower apartments, wash basins, showers, gates and water pipes;
Sealing of kitchen installations, side closets, cesspools, water pipes, etc. Glass daylighting roof and point glass curtain wall are clicked and sealed;
Cling and sealing of colorful press systems;
Installation of all kinds of advanced doors and windows, cling and sealing of inner and out-of-door glass decoration;
Advanced pristine sword engineering joint sealing and other general construction purposes.
Item | Result | ASTM Standard |
Test condition | 23°C/73°F, 50% RH | |
Tack-free time | 30-60 minutes | ASTM C679 |
Curting Time(5mm) | ≤12 hours | |
Fully Curing time | 24 hours | |
After cured 21 days testing condition | 23°C/73°F, 50% RH | |
Hardness(Shore A) | 20-60 | ASTM C661 |
Density (g/cm3) | 1.45±0.1 | |
Tensile Strength(MPa) | 1.1 | |
Elongation(%) | 300 | ASTM C1135 |
Shearing strength(MPa) | 7 | |
Shelf life(Months) | 9-12 | |
Temperature range(°C) | -40 ~ 150 |
Color
Clear/White/Black/Grey or Customized Color
Shelf life and Stroage
When stored in unopened original containers at 27 º C (80 º F) or below, the shelf life from the date of production is 9-12 months.
Package
24 Pcs/box,64boxes/pallets
300ml cartridges and 590 ml foil sausage
Construction operation
- Conduct compatibility and adhesion test of contact materials before use;
- Clean the surface of the substrate to be bonded;
- Extrude the glue from the barrel to the interface with the glue gun;
- During construction, the joint shall be completely filled with sealant to ensure the bonding of both sides;
- Trim the edge before the glue is cured;
- Strike in a ventilated place;
Usage restrictions
Structural assembly;
Completely isolated from air before curing;
Need to paint the surface or must use construction grade sealant engineering;