SKU: | |
---|---|
Availability: | |
Quantity: | |
Product Description
Ecellent Waterproof Mildewproof Kitchen And Bathroom Shower Silicone Sealant
Year-K110 is neutral,one part room temperature curing silicone sealant, easy to apply, and speedy curing.
Composition
RTV Silicone Sealant
One-component, impartial curing
Longer carrier life.
Excessive strength, desirable elasticity, slight hardness, and a spread of substrates have suitable bonding overall performance.
Amazing weathering resistance,anti-mildew,anti-fungal resistant, and excessive and occasional temperature performance, it may resist long-term ultraviolet irradiation, hot temperature (-50℃ to +a hundred℃) and does not affect the performance.
Sealing of sanitary centers, tiles, bathtubs, bathe rooms, wash basins, showers, taps and water pipes;
Sealing of kitchen centers, side shelves, sinks, water pipes, and so forth. Glass daylighting roof and point glass curtain wall are bonded and sealed;
Bonding and sealing of numerous cupboard tasks;
Installation of all types of advanced doors and windows, bonding and sealing of indoor and outside glass ornament;
Advanced stainless-steel engineering joint sealing and different widespread construction purposes.
Item | Result | ASTM Standard |
Test condition | 23°C/73°F, 50% RH | |
Tack-free time | 30-60 minutes | ASTM C679 |
Curting Time(5mm) | ≤12 hours | |
Fully Curing time | 24 hours | |
After cured 21 days testing condition | 23°C/73°F, 50% RH | |
Hardness(Shore A) | 20-60 | ASTM C661 |
Density (g/cm3) | 1.45±0.1 | |
Tensile Strength(MPa) | 1.1 | |
Elongation(%) | 300 | ASTM C1135 |
Shearing strength(MPa) | 7 | |
Shelf life(Months) | 9-12 | |
Temperature range(°C) | -40 ~ 150 |
Color
Clear/White/Black/Grey or Customized Color
Shelf life and Stroage
When stored in unopened original containers at 27 º C (80 º F) or below, the shelf life from the date of production is 9-12 months.
Package
24 Pcs/box,64boxes/pallets
300ml cartridges and 590 ml foil sausage
Construction operation
- Conduct compatibility and adhesion test of contact materials before use;
- Clean the surface of the substrate to be bonded;
- Extrude the glue from the barrel to the interface with the glue gun;
- During construction, the joint shall be completely filled with sealant to ensure the bonding of both sides;
- Trim the edge before the glue is cured;
- Strike in a ventilated place;
Usage restrictions
Structural assembly;
Completely isolated from air before curing;
Need to paint the surface or must use construction grade sealant engineering;