SKU: | |
---|---|
Availability: | |
Quantity: | |
Product Description
Neutral Smooth Mould Proof Waterproof Silicone Sealant Kitchen Bathroom for Bathroom Sink Toilet
YR-K110 is one component, neutral, room temperature curing silicone sealant, easy to use and fast curing.
RTV Silicone Sealant
One-component, Neutral curing
Longer service life.
High strength, good elasticity, moderate hardness, a variety of substrates have good bonding performance.
Excellent weathering resistance,anti mould,anti-fungal resistant and high and low temperature performance, it can be withstand long-term ultraviolet irradiation, extreme temperature (-50℃ to +100℃) and does not affect the performance.
Application
Sealing of sanitary facilities, tiles, bathtubs, shower rooms, wash basins, showers, faucets and water pipes;
Sealing of kitchen facilities, side cabinets, sinks, water pipes, etc. Glass daylighting roof and point glass curtain wall are bonded and sealed;
Bonding and sealing of various cabinet projects;
Installation of all kinds of advanced doors and windows, bonding and sealing of indoor and outdoor glass decoration;
Advanced stainless steel engineering joint sealing and other general construction purposes.
Item | Result | ASTM Standard |
Test condition | 23°C/73°F, 50% RH | |
Tack-free time | 30-60 minutes | ASTM C679 |
Curting Time(5mm) | ≤12 hours | |
Fully Curing time | 24 hours | |
After cured 21 days testing condition | 23°C/73°F, 50% RH | |
Hardness(Shore A) | 20-60 | ASTM C661 |
Density (g/cm3) | 1.45±0.1 | |
Tensile Strength(MPa) | 1.1 | |
Elongation(%) | 300 | ASTM C1135 |
Shearing strength(MPa) | 7 | |
Shelf life(Months) | 9-12 | |
Temperature range(°C) | -40 ~ 150 |
Color
Clear/White/Black/Grey or Customized Color
Shelf life and Stroage
When stored in unopened original containers at 27 º C (80 º F) or below, the shelf life from the date of production is 9-12 months.
Package
24 Pcs/box,64boxes/pallets
300ml cartridges and 590 ml foil sausage
Construction operation
- Conduct compatibility and adhesion test of contact materials before use;
- Clean the surface of the substrate to be bonded;
- Extrude the glue from the barrel to the interface with the glue gun;
- During construction, the joint shall be completely filled with sealant to ensure the bonding of both sides;
- Trim the edge before the glue is cured;
- Strike in a ventilated place;
Usage restrictions
Structural assembly;
Completely isolated from air before curing;
Need to paint the surface or must use construction grade sealant engineering;